The SCD-90 has been developed to be integrated to all Bewo cutting lines, all settings can be entered from the central cotrol panel of the cutting line. Therefore all adjustments are also available in automatic setting.
Each tube will be deburred separately, in combination with long brush length gives an optimal deburring result. For the deburring of square and rectangular profiles special turning mechanism are availabe to turn the products along t…view product
This deburring machine has been developed to couple with a Bewo automatic short cut saw, this coupling is done by means of a robot. The transfer from the cutting machine to the deburring machine is done by a robot. The robot feeds the products directly from the sawing machine into the deburring machine, tone up two four pieces at the time.
The Machine is suitable for the automatic processing of round tubes in the following range:
Diameter: 6 - 60 mm
The SCM is developped for integration with every Bewo cuttling line, and suitable for tubes and bars.
The machine consists of two chamfering units, that will be automatically set for the product length. With the application of quick exchange systems, the changeover time going to another diameter and or length is relatively short.
The chamfering units are equipped with various cutting plates enabling chamfering of inside, outside of the tube, as well as making a precise flat edge…view product
The length control system, model BMS-90, allows a fast and accurate 100% length check on cut and deburred tubes. The transport system and the control system are integrated in the Bewo cutting line and can process up to 3,200 tuber per hour.
Disapproved products will be separated individually and evacuated through a belt conveyor from the production line.
This intelligent length control system operates contactless with two digital cameras positioned above the ends of the tube. The result of the length control from the cameras is combined and analysed by a programme which determines any discrepancy in the length of the tube compared to a reference point.
The machine has a capacity of over 6,000 tubes per hour. Any tubes that do not meet the specifications required are separated. The programme also recognises chips on the tube ends so that th…view product
The SCR-90 stacking robot enables the production without involvement of an operator. The range of the robot offers maximum four different stacking positions, each of which can be set individually. We designed the process to be user-friendly and included the possibility to run a simulation.
The stacking routine can be selected wtihout any knowledge of robot programming, with the aid of intelligent possibilities of the Bewo stacking robot. There are grippers available for…view product
The Bewo belt collection system offers the possiblity to collect output without the interference of an operator. The system is designed in such a way that scratced will be minimized and reduces also the noise.
Two manual adjustable mobile units, provided with nylon straps that adapt to the output, in order to reduce the falling height of the products.
The TCM-90 is a universal tube cleaning system, constructed of stainless steel and insulated to minimise heat losses. The tubes will be transported with a segmented drum through the washing liquid.
After washig the products will be dryed, a walking beam system transports the products though the drying zone. Here the products will be dryed with circulated air generated by air pumps.
With this process we can guarantee products without chips, its processing capacity can reach…view product
With the practical and user friendly Bewo measuring table you are able to measure tube lengths quickly. The digital read out eases the measuring of relatively large product lengths that need to be within a certain tolerance range. The Solitair is equipped with a measurement computer and optional printer.
The Solitair is suitable for measuring tubes up to 3,000 mm.
Do your deburring brushes need replacing?
We supply at a competitive price from stock!
Bewo deburring brushes are:
Factory balanced on the shaft, which give less wear due to precise balancing. Quickly exchangeable (no balancing needed). Directly availabe for use after delivery. The 450 or 600 mm brush length guarantees an optimal deburring result.view product